What is the decimal and binary range of the first octet of Class B IP addresses

Class B addresses start with a binary 10 in the first 2 bits of the first octet. Therefore, the lowest number that can be represented with a Class B address is 10000000, decimal 128. The highest number that can be represented is 10111111, decimal 191.

What is the Class B range of values for the first octet in decimal and in binary?

IP Address ClassFirst Octet of IP AddressLowest Value of First Octet (binary)Class B10xx xxxx1000 0000Class C110x xxxx1100 0000Class D1110 xxxx1110 0000Class E1111 xxxx1111 0000

What is the address range of Class B network address in binary bits?

The range of a Class B network address is 128-191 . This makes our binary range 10xxxxxx .

What is the range of a Class B IP address?

Network ClassByte 1 RangeByte 3 RangeA0-1271-254B128-1911-254C192-223Preassigned by Internet

What is a Class B IP address?

Class B IP addresses are used for medium and large-sized networks in enterprises and organizations. They support up to 65,000 hosts on 16,000 individual networks. Class C addresses are most common and used in small business and home networks. These support up to 256 hosts on each of 2 million networks.

What is the class A B and C address range in decimal and in binary?

Address ClassBinary Address Must Begin WithFirst Term of Dotted Decimal Address Must BeA00 — 127B10128 — 191C110192 — 223

What is the binary range of the first octet of a Class B address?

Address ClassFirst Octet RangeNumber of Possible NetworksClass A0 to 126127 (2 are reserved)Class B128 to 19116,384Class C192 to 2232,097,152

What is the assignable range of values for the first octet for class A IP networks?

What is the assignable range of values for the first octet for Class A IP networks? D. The first octet of Class A addresses ranges from 1 to 126, inclusive; Class B, 128 to 191, inclusive; and Class C, 192 to 223 inclusive. 127 is technically in the Class A range, but it is a reserved address used as a loopback.

What is the range of IP address?

An IP address is always a set of four numbers like that. Each number can range from 0 to 255. So, the full IP addressing range goes from 0.0. 0.0 to 255.255.

What is the range of private IP address?

Public IP addressPrivate IP addressNot freeFreeAny number not included in the reserved private IP address range Example: 8.8.8.8.10.0.0.0 — 10.255.255.255; 172.16.0.0 — 172.31.255.255; 192.168.0.0 — 192.168.255.255 Example: 10.11.12.13

Article first time published on

What is subnet mask of Class B?

Class B networks use a default subnet mask of 255.255. 0.0 and have 128-191 as their first octet. The address 172.16. 52.63 is a class B address.

What is the address range of a Class C network address in binary?

Class C network addresses range from 192.0. 0.0 to 223.255. 255.0. There are over 2 million possible Class C networks.

What is a class B subnet?

Consequently, the default subnet mask for Class B is 255.255. 0.0. In addition, Class C IP addresses are normally assigned to a very small-sized network. Their IP addresses range from 192 to 233 and their default subnet mask is 255.255.

What is class B in networking?

A class B network is a type of network in the now-defunct classful networking architecture. … Class B networks have IP addresses between 128.0. 0.0 and 191.255. 255.255. The Classful networking system has been superseded by CIDR (Classless Inter-Domain Routing) since 1993.

What does 255 mean in a subnet mask?

Class C Subnet Mask Examples 255 are the numeric values of three sets of eight 1 bits. The 0 means eight 0 bits. There are “no” subnets, and up to 254 hosts can be addressed in this network (255 minus 1).

How do you write 128 in binary?

128 in binary is 10000000.

What is the binary equivalent of the decimal number 240?

Therefore, the binary equivalent of decimal number 240 is 11110000.

What is the subnet mask for 22 subnet mask?

AddressesNetmask/24256255.255.255.0/23512255.255.254.0/221024255.255.252.0/212048255.255.248.0

How do I know if my IP is Class AB or C?

If it begins with 0, then it’s a Class A network.
If it begins with 10, then it’s a Class B network.
If it begins with 110, then it’s a Class C network.
If it begins with 1110, then it’s a Class D network.
If it begins with 1111, then it’s a Class E network.

What is a Class C IP address?

A Class C address consists of a 24-bit network address and an 8-bit local host address. … The first 24 bits contain the network address (the three highest order bits will always be 1-1-0). The remaining 8 bits contain the local host address. In other words, the first octet of a Class C address is in the range 192 to 223.

Which of the following is an example of a Class B IP address?

Class B Network The first 16 bits (known as two octets) help you identify the network. The other remaining 16 bits indicate the host within the network. An example of Class B IP address is 168.212. 226.204, where *168 212* identifies the network and *226.204* helps you identify the Hut network host.

Which of the following is a Class B host address?

Class B Address Class B IP Addresses range from 128.0.x.x to 191.255.x.x. The default subnet mask for Class B is 255.255.x.x.

How do IP address ranges work?

IP addresses are expressed as a set of four numbers — an example address might be 192.158. 1.38. Each number in the set can range from 0 to 255. So, the full IP addressing range goes from 0.0.

What is a mask in IPv4 addressing?

A subnet mask hides (or masks) the network part of a system’s IP address and leaves only the host part as the machine identifier. It uses the same format as an IPv4 address — four sections of one to three numbers, separated by dots.

What is a mask in IPv4 addressing what is a default mask in IPv4 addressing?

Default Subnet Mask A subnet mask is a four-octet number used to identify the network ID portion of a 32-bit IP address. A subnet mask is required on all class-based networks, even on networks that are not subnetted.

What are the three ranges of ip addresses?

10.0. 0.0 to 10.255. 255.255.
172.16. 0.0 to 172.31. 255.255.
192.168. 0.0 to 192.168. 255.255.

What is class A IP address?

What Does Class A IP Address Mean? A Class A IP address is an IP address in which the first bit of the octet is set to zero, which provides values from 1 to 127. By contrast, a Class B address has the first bit set to one, and the second bit set to zero to utilize the remaining address set.

What is a private subnet?

A private subnet sets that route to a NAT instance. Private subnet instances only need a private ip and internet traffic is routed through the NAT in the public subnet. You could also have no route to 0.0. 0.0/0 to make it a truly private subnet with no internet access in or out.

How do you subnet a Class B?

Subnet64.0128.0broadcast127.255191.255

How do I assign a Class B IP address?

A class B network number uses 16 bits for the network number and 16 bits for host numbers. The first byte of a class B network number is in the range 128-191. In the number 129.144. 50.56, the first two bytes, 129.144, are assigned by the InterNIC, and comprise the network address.