If you need to conserve space for a better flow in your kitchen, go with a counter-depth. If you have a large family, though, we recommend regular-depth to ensure you’ll have plenty of space to meet your daily needs. Meanwhile, avoid costly mistakes by carefully measuring your space.
Are counter-depth fridges worth it?
The main reason to get a counter-depth fridge is aesthetics. They just look better! … They’re also more expensive and offer less flexibility in terms of features — most are arranged in a French door-style; you won’t find many options for a single-door, counter-depth fridge.
What is the shallowest refrigerator depth?
What is the shallowest depth refrigerator? The most shallow counter-depth refrigerators have depths of about 24 inches not including handles.
Do counter depth refrigerators have less space?
Because counter-depth fridges are shallower than standard ones, they tend to offer less cubic feet of interior food storage space. Standard fridge/freezer combos average between 22 and 31 cubic feet of space, while baseline counter-depth fridges are between 20 and 23 cubic feet. Shallower depth can be limiting.Why are counter depth refrigerators more expensive?
To achieve the same capacity as a standard appliance, a shallower counter-depth appliance needs to be considerably wider. This can mean a reduction in countertop space, as well as a wider door that requires a larger swing radius. And this special design may cost more than a standard appliance.
Are counter depth refrigerators wider?
With a refrigerator depth between 23 to 27 inches, counter-depth fridges are typically wider and taller than standard-depth fridges to compensate for the reduced volume and to be more space-efficient. Counter-depth units usually have French doors or side-by-side doors.
How far should refrigerator stick out from counter?
Just how far should your fridge stick out past the counter? If you do not have a counter-depth refrigerator, your standard fridge will stick out 6″ or more from the counter. A counter-depth fridge will only stick out as much as the door depth, typically just a few inches.
What is the depth of a typical kitchen counter?
While the standard kitchen countertop depth is 25 ½ inches, most kitchen island countertops can go up to 27 or 28 inches deep and over 30 inches deep if it comes with a breakfast bar. The island countertop depth depends on the availability of space.What is the difference between standard and counter depth refrigerators?
Counter depth refrigerators tend to be shallower than standard depth but they generally will be wider or taller. This unit typically is 23 to 27 inches deep; the shallower depth makes it easier to grab items near the back of the fridge and provides a blended look with it’s surroundings.
What is a counter-depth refrigerator mean?“Counter-depth” refers to the distance between the front of your kitchen countertops and your back wall or backsplash. These refrigerators are usually 24–30-inches deep, shallower than most fridges, to line up with the end of your cabinets and fit in nicely with most modern kitchen designs.
Article first time published onDo they make shallow fridges?
You’ll find all the same features in most shallow fridges that you’d find in their standard counterparts, but they are made to be wider and shallower so they don’t protrude from the edge of your countertops.
How much space is needed between top of fridge and cabinet?
Air must be able to circulate around the box to help the refrigerator run efficiently, avoid overheating and last its full life span. The refrigerator will need minimum clearances of 2-inches from the back wall, 1-inch from the upper cabinet and 1/8-inch on either side of the fridge.
What size cabinet goes above a fridge?
In standard kitchens, the wall cabinets are typically 30 or 36 inches tall, with the space above enclosed by soffits. Where the cabinets run all the way to the ceiling, 48-inch cabinets are the logical choice. A 12-inch or 15-inch tall cabinet fits neatly over a refrigerator.
Can you fit a pizza box in a counter depth fridge?
Yes you can fit everything in a new counter depth model, but to fit it all, you can go with the side-by-side in the Whirlpool Ice collection or choose one of many other options especially from Kitchenaid.
How deep is a French door refrigerator?
Standard refrigerator width ranges from 28 to 32 inches wide for slim top-freezer and bottom-freezer models, with wider side-by-side and French door fridges extending to 36 inches. With doors fully ajar, depth may increase to 45 to 50 inches deep.
How deep is an upper kitchen cabinet?
Standard wall cabinets (sometimes referred to as “upper cabinets”) are 12 inches deep; standard base (below-counter) cabinets are 24 inches deep.
How deep are bottom cabinets?
A standard base cabinet should be 24 inches or 61 cm in depth. Since refrigerator manufacturers now make deeper fridges, it directly creates a need for deeper countertops or cabinets. If your kitchen isn’t too large, there are base cabinets as small as 12 inches in depth which can fit into tiny spaces in the kitchen.
How much space should be between countertop and upper cabinets?
The standard distance between the top of a kitchen counter and the bottom of the wall cabinets above it is 18 inches. For the average person, this distance is the ideal balance between plenty of space to work on the countertop and the ability to reach all of the shelves in the cabinet.
How shallow can a refrigerator be?
But with a counter-depth model—24 to 29 inches (including doors, handles, and all)—your refrigerator is as close to flush as possible if you’re not going for the pricer built-in models. (Counter-depth fridges are thousands of dollars less than built-in styles.)
What size opening do I need for a 36 inch refrigerator?
1-8 of 8 Answers. The unit is 35 and 3/4 inches wide. If you’re installing next to a wall, you’ll need a minimum clearance of 3 and 3/4 inches for the door.
What is the standard cabinet opening for a refrigerator?
The standard opening for a refrigerator is usually 36” wide and the wall cabinet over it is usually 36” in width.
How close can a refrigerator be to the wall?
The refrigerator should be at least two inches from the wall. Top — If you have back coils, you will need at least two inches of top clearance to dissipate heat, but for bottom coils, as little as one inch can be sufficient. Sides — Regardless of coil placement, the sides require the least amount of space.
How much space is needed between cabinets and stoves?
Building codes do not require any spacing amount between your stove and the cabinets on either side of it. It is recommended that you leave between 24″ and 30″ of space between the top of your stove and the above cabinet.
What are the dimensions of a fridge?
Standard refrigerator sizes range from around 24 to 40 inches in width, 62 to 72 inches in height and 29 to 36 inches in depth. Generally speaking, french door and side-by-side refrigerators will be larger in width and height, though counter-depth models are frequently available in these two configurations.
